Rate Limiting the Spinnaker API

Configure Spinnaker to avoid cloud providers such as AWS, GCP, and Azure from throttling your Spinnaker traffic.

How Spinnaker monitors a deployment

Spinnaker polls the entire state of managed cloud resources every 30 seconds through the Clouddriver service. The polling can cause cloud providers, such as AWS, to throttle the requests on your account. If you have a large number of Auto-Scaling Groups and Elastic Load Balancers in your account or other services commonly querying the same APIs then you can expect to see throttling exceptions in your Spinnaker logs.

How to alleviate AWS throttling exceptions

There are several things you can do to help reduce the effects of throttling:

  • Set fine tune rate limits within Spinnaker.
  • Adjust Spinnaker’s retry limit per request.
  • Decrease the polling interval.

Fine-grained rate limits

Spinnaker queries your Cloud Provider (AWS, GCP, Azure, Kubernetes, etc) frequently to understand the state of your existing infrastructure and current deployments. However, this might cause you to run into rate limits imposed by the Cloud Provider. To help avoid this Spinnaker provides controls to limit the number of requests it generates. The unit used for these controls is “requests per second” (a double float value). Global defaults are 10.0 max requests per second.

Below is an example configuration for global rate limits for all services that you would place in your SpinnakerService manifest under section spec.spinnakerConfig.profiles.clouddriver:

serviceLimits:
  defaults:
    rateLimit: 10.0   # default max req/second

If you have multiple Cloud Providers, you can limit each one differently:

serviceLimits:
  cloudProviderOverrides:
    aws:
      rateLimit: 10.0   # default max req/second

You can provide account specific overrides as well in case you have significantly more resources in one account while others have less:

serviceLimits:
  accountOverrides:
    my-test:
      rateLimit: 10.0   # default max req/second
    my-prod:
      rateLimit: 10.0   # default max req/second

And finally, you can have more fine-grained control for particular AWS endpoints that might have a different rate limits.

We’ve found that this formula works pretty well:

max_req_second = num_of_x_resources / clouddriver_30s_poll_interval

For example, if we have 90 load balancers and clouddriver polls every 30 seconds, then we’ll end up with a rate limit of 3 reqs/second for AmazonElasticLoadBalancing.

Here’s the list of rate limits you can adjust created from AmazonClientProvider.java@v5.36.0 on 05/14/2019 by using the regex \w+\.class:

serviceLimits:
  implementationLimits:
    AWSApplicationAutoScaling:
      defaults:
        rateLimit: 10.0   # default max req/second
    AWSApplicationAutoScalingClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AWSLambda:
      defaults:
        rateLimit: 10.0   # default max req/second
    AWSLambdaAsync:
      defaults:
        rateLimit: 10.0   # default max req/second
    AWSLambdaAsyncClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AWSLambdaClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AWSSecretsManager:
      defaults:
        rateLimit: 10.0   # default max req/second
    AWSSecretsManagerClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AWSServiceDiscovery:
      defaults:
        rateLimit: 10.0   # default max req/second
    AWSServiceDiscoveryClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AWSShield:
      defaults:
        rateLimit: 10.0   # default max req/second
    AWSShieldClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonAutoScaling:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonAutoScalingClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonCloudFormation:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonCloudFormationClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonCloudWatch:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonCloudWatchClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonEC2:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonEC2ClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonECR:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonECRClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonECS:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonECSClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonElasticLoadBalancing:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonElasticLoadBalancingClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonIdentityManagement:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonIdentityManagementClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonRoute53:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonRoute53ClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonS3:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonS3ClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonSNS:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonSNSClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonSQS:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonSQSClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonSimpleWorkflow:
      defaults:
        rateLimit: 10.0   # default max req/second
    AmazonSimpleWorkflowClientBuilder:
      defaults:
        rateLimit: 10.0   # default max req/second

Using these settings will help you avoid hitting the AWS rate limits. They can also help Spinnaker be more responsive since the cloud provider clients will not implement their back-off strategy to continue to query the infrastructure.

Request retry

You can set the number of retries per request with the following setting:

aws:
  client:
    maxErrorRetry: 3 # default

This is the number of retries before the request fails. It’s used with an exponential backoff, maxing out at 20 seconds.

Fiat hitting rate limits

If Fiat is configured to poll Github or Google, you may end up seeing rate limits when Fiat does its polling for user groups. Some symptoms that you might see are:

  • You can’t log into Spinnaker anymore

  • Your Fiat logs contain lines similar to:

    GithubTeamsUserRolesProvider : [] HTTP 403 Forbidden. Rate limit info: X-RateLimit-Limit
    GoogleDirectoryUserRolesProvider : [] Failed to fetch groups for user x: Rate Limit Exceeded
    

To address this issue, adjust poll cycle time and/or timeouts in your SpinnakerService manifest under section spec.spinnakerConfig.profiles.fiat (beware: you will end up with two nested fiat sections). See (FiatServerConfigurationProperties.java for more details).:

fiat:
  writeMode:
    # Poll cycle interval, "check if a user belongs to a group every X ms"
    syncDelayMs:  600000 # the default 600000 (10 mins) is usually fine

    # How much time to between retries of dependent resource providers if they are down.
    retryIntervalMs: 10000

FAQ

Q: Why doesn’t Spinnaker use AWS Config to update its state?

A: AWS Config does not support all resource types. The two most rate limited APIs are Auto Scaling and Classic Elastic Load Balancing, neither are supported by AWS Config. Additionally, there is a non-trivial delay from the time a resource is created and the time a notification is created by AWS Config.


Last modified December 9, 2022: (77a2e500)